Sawdust briquette making machine can produce 40mm,50mm,60mm and 70mm briquettes according to the size of the forming cylinder. The sawdust briquette machine is the main equipment that uses wood, rice husks, peanut shells, plant straws and other carbon-containing wood materials to make rod-shaped solid fuels under high pressure and high temperature conditions.
The sawdust briquette machine adopts automatic constant temperature device, stable working performance at the set temperature, reasonable structure, simple operation and maintenance, etc. The sawdust briquettes produced by this machine is easy to ignite after carbonization, has a high calorific value (more than 20% higher than that of ordinary wood), has less pollutants and large specific gravity, which is convenient for storage and transportation. It can make full use of crop residues to turn wastes into treasure and alleviate the tension of energy shortage in agriculture and forestry in all over the world.
The biomass briquette machine is also called wood briquette press and rice husk briquette press, which is the main forming equipment for producing machine-made BBQ charcoal briquettes. It can process granular (length≤5mm, diameter≤3mm) waste materials such as bamboo, wood, husk, straw (except rice stalk, wheat straw) with moisture content<12%, without any binder under high temperature and high pressure process and extrudes the materials into a solid fuel rod with a center hole.
The wood briquette machine can process sawdust, crop stalks (corn stalks, soybean stalks, sorghum stalks, cotton stalks, rape stalks, peanut stalks, sunflower stalks), chaff, grasses, shrubs, bamboo and wood stalks, materials, sugarcane Slag and other materials. After being crushed by a sawdust crusher, the materials can be pressed into a hollow rod in a high temperature and high pressure zone, in the mold area, it is one screw propeller and a heating ring to process the loose raw materials. The finished wood briquettes have the advantages of high density, small size and good combustibility, and also can replace fuelwood and coal. Generally, the outer diameter of the product is 50-70mm, the hole diameter is 15-20mm, and it is hollow four-corner or hexagonal cylinder shape. It can also be made into spherical, granular and honeycomb shapes.